#SERVIIO VIDEO ON AND OFF INSTALL#
#SERVIIO VIDEO ON AND OFF UPDATE#
#SERVIIO VIDEO ON AND OFF PRO#

#SERVIIO VIDEO ON AND OFF PRO#

Corsair Commander Pro to control the fans (see script and code)ĬPU FAN: 1xCorsair H60 CPU Radiator - Front OS: 1 x Kingston UV400 120GB SSD - boot driveįANS: 3xFractal R3 120mm - 3 Front, 1 Rear. SSD: 4 x Samsung 850 EVO Basic (500GB, 2.5') - VMs/Jails Use existing Drives 8 x10TB WD Red, 8 x4TB WD Purple, + a mix of WD Purple and shucked WD Elements 12TB x 8ĬPU: Xeon E5-2620v4 + Corsair H60 Cooler block.1 xLSI Logic Controller Card 05-25699-00 9305-24i 24-Port SAS 12Gb/s PCI-Express 3.0 Host Bus Adapter.6 xCableCreation Internal Mini SAS HD Cable, Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable.1 xNORCO 4U Rack Mount 24 x Hot-Swappable SATA/SAS 6G Drive Bays Server Rack mount RPC-4224.Corsair Commander Pro to control the fans (see script and code) 3 xNoctua NF-F PWM (120mm) * having noted later in Stux's thread that 1500 RPM is not sufficient to cool the HDDs.

2 xNoctua NF-A8 PWM Premium 80mm PC Computer Case Fan.4 x Kingston Value RAM (32GB, DDR4-2400, ECC RDIMM 288).1 x Corsair HX1200 (1200W) - PSU to support 24 HDD + several SSD and PCI cards.1 x Kingston UV400 120GB SSD - boot drive (hit the 3D NAND/TRIM bug with the original WD green selection, failing scrub and showing as corrupted OS files) Decided to go with no mirror and use the config backup script.2 x WD Green 3D NAND (120GB, 2.5') - Boot drives (maybe mess around trying out the thread to put swap here too link).1 x ASUS Z10PA-D8 (LGA 2011-v3, Intel C612 PCH, ATX) - Dual socket MoBo.best of luck with it.Īiming to mostly replicate the build from (with some mods, hopefully around about as good as that link) When I ran it it was also complaining about not being able to find or create a directory for the user settings file, so I'm not sure it is really 100% working.īut indeed after a little googling, it seems I can connect to the web console at and get in. Instead of that, you should use the web console (see last line below) as it seems they decided not to include that file anywhere. You'll have to press 'Y' a few times to agree to going ahead during the process.Īt the end, it mentions you need to 'run the /usr/local/bin/serviio-console (a GUI program) on the same host - as yourself - to configure it.'. it takes a while, but much shorter than letting the dependencies compile)

#SERVIIO VIDEO ON AND OFF INSTALL#

Pkg install `make all-depends-list | cut -d / -f 4,5` (that installs about 390 packages.

#SERVIIO VIDEO ON AND OFF UPDATE#

Then connect to it: iocage console serviioĬd /usr/ports svnlite update (you would do this again in future together with a pkg upgrade and make install to get updated versions later) First, if you don't have one: iocage create -n 'serviio' -r 13.0-RELEASE vnet='on' dhcp='on' bpf='yes'

Serviio video on and off